Laboratory Equipment

MM BA001 Blood Gas Analyzer

Product Description

Introduction :

The system ensures the test performance and convenience for the users. Standard gas tanks and liquid calibrates are easily accessible by the users. Routine maintenance is limited to the replacement of electrodes and a single pump tube. This system measure PH, PCO2, PO2 and Ion parameters (K/Na/Cl/Ca), and calculate many additional parameters. The system achieves to test the samples quickly with economic cost.

Advantages :

  • Self-made innovative and advanced maintenance-free electrodes. The membranes never need to be changed by the users, saving cost and low maintenance.
  • Innovative electrodes observing window, easy to observe the sample's flow condition. Diagnostic software displays component status, assuring quick troubleshooting. It is easy for the laboratories with limited access to technical service personnel.
  • Simple operation with a touch of the keypad. The software allows selection of desired options, including Reference Limits, Quality Control Limits, Operator ID and Patient Data.
  • The sample probe's self-wiping feature provides convenience, sample integrity and user safety.
  • High polishing and smooth sample probe ensures low carry-over and low cross-contamination
  • Low Gas Composition: CO2 5% O2 20% N2 75%,
  • High Gas Composition: CO5 10% N2 90%
  • Tank(L) Pressure: 15MPa
  • Tank(S) Pressure: 10MPa
  • Two Level Gas Regulator


Features :

  • Test parameters: pO2, pCO2, pH
  • Optional additional test parameters: K+, Na+, Cl-, Ca+ (Electrolytes Analyzer)
  • Calculated Parameters: pH(TC) PCO2(TC) PO2(TC) HCO3– SBC AG BE BEecf TCO2 sO2% A-aDO2 RI Ca++(7.4) TCa++
  • Maintenance-free (no need to replace the membrane) electrodes
  • Expert system (optional) available to assist diagnosis
  • Analysis time: about 55s
  • Sample usage ≤ 200µL
  • Test speed ≥ 20 samples/h
  • Temperature raise time ≤ 1h
  • Wide screen display (240*128 LCD)
  • RS232 port for PC communication
  • Thermal printer output (dot matrix printer on demand)


Specification :

  • Model V100 vaporizer ensures precise and stable of output concentration.
  • pH(cH) test range: 6.800—8.000 (158.5 –10 mmol/L)
  • PCO2 test range: 1.607—26.67 kPa (8.0—200.0 mmHg)
  • PO2 test range: 0—106.7 kPa (0—800mmHg)
  • K+ test range: 2.0—10 mmol/L
  • Na+ test range: 50—200 mmol/L
  • Cl-test range: 50—200 mmol/L
  • Ca++ test range: 0.5—3.0 mmol/L
  • pH Deviation: 20 * 10-3 ≤0.1%
  • PCO2 Deviation: 4% or 0.13kPa (maximized) ≤1.5%
  • PO2 Deviation: 3% or 0.13kPa (maximized) ≤1.0%
  • K+ Deviation: 0.4 mmol/L ,≤2.0% CV
  • Na+ Deviation: 4 mmol/L, ≤1.0% CV
  • Deviation: 4 mmol/L, ≤2.0% CV
  • Ca++ Deviation: 0.3 mmol/L, ≤3.0% CV
  • Ambient Temperature: 15 C ~ 30 C
  • Relative Humidity: ≤ 80%
  • Air Pressure: 86 ~ 106 kPa
  • Sun Radiation: Avoid direct sunshine
  • Power Supply: 220/110V, 50/60Hz


Standard Packing List :

  • lood Gas analyzer 1 unit
  • pCO2 Electrode 1 piece
  • Buffer for pO2 electrode (3 pieces/pack) 1 set
  • pO2 Electrode 1 piece
  • Buffer for pCO2 electrode (3 pieces/pack) 1 set
  • pH Electrode 1set
  • Ref Electrode 1 piece
  • Dummy array electrode+ Dummy electrode for MM-BA001 1 set
  • Standard A 1 bottle/400mL
  • Standard B 1 bottle /200mL
  • Flush solution 2 bottles/800mL
  • Cleaning Solution(20ml) 1 piece
  • Refill solution for pH electrodes 5 pieces/set
  • Refill solution for Ref electrode 20ml/bottle
  • Waste solution bottle 1 bottle
  • Bottle cap 4 pieces
  • Electrodes conditioner 5 pieces/set
  • De-proteinizer for Blood Gas & Electrolytes Analyzer 1 set(5 enzyme+5 diluent)
  • Auxiliary pump tube 3 pieces
  • Leakage checking solution 5ml/1bottle
  • Brush 1 pieces
  • Filling caps of bubble chambers 2 pieces
  • Pipe hoop 2 pieces
  • Power cord 1 piece
  • Printer paper 3 rolls
  • Probe tie-in 1 piece
  • Connecting hose 2 pieces
  • Adjustable spanner 1 piece
  • Syringe 1 piece
  • Needle for blockage elimination 1 piece
  • Steel needle 3 pieces
  • Allen key 1 unit
  • Screw for blood gas electrodes 1 piece
  • Electrode O' ring for ISE Electrodes: 5 pieces (1set)
  • Electrode O' ring for pCO2, pO2: 2 piece (1 set)
  • Two-way connector(ะค8) 2 pieces
  • O' ring for micro-valve 2 pieces
  • User manual (installation record form x 2) 1 set
  • Service manual 1 set